Common faults of safety trolley lines and their solutions

To put it simply, a safety sliding contact line is a sliding device that is applied between two wires to produce electrical conductivity.For example, we will see two wires on the roof of an electric bus, which are actually a kind of safety sliding wire.It should be noted that it has many forms, including rails on the side of the channel, etc. Some faults often occur during actual use, so how to solve it? 1. Power outage Causes of faults: 1. The height of the conduit joint caused by injustice.2. There is a problem with the single conductor.3. The guide rail became loose during use.4. The brush climbs in the conduit.5. Due to long-term use, the brushes are worn.Treatment method: 1. You can gently shake the conductor to check for wear problems, and replace the roller or conductor according to the specific situation.2. Replace the brush with a new one.3. Connect the guide rails as required.4. Use double conductors.5. If it is loose, tighten the guide rail connecting bolts.2. The conduit shakes too much during o